PRO560-HS机械轴承丝杠平台 | PRO560-HS Mechanical-Bearing Ball-Screw Linear Stage | 滚珠丝杠驱动直线定位平台
The PRO560-HS series is similar in design to the PRO280-HS series stages but with a wider cross section for better support of long travel upper axes or large footprint payloads. It also has a 25 mm/rev ground ball-screw for higher speed compared to the standard PRO560 series.
PRO560-HS Specifications
| Model | PRO560-HS-0300 | PRO560-HS-0400 | PRO560-HS-0500 | PRO560-HS-0600 | |
|---|---|---|---|---|---|
| Travel | 300 mm | 400 mm | 500 mm | 600 mm | |
| Accuracy(1) | ±17.5 μm | ±19 μm | ±21 μm | ±23 μm | |
| Resolution | 2.5 μm with 2500-line Quadrature Encoder/0.1 μm with 1000-line AS Encoder | ||||
| Bidirectional Repeatability(1) | ±5 μm | ||||
| Straightness and Flatness(1) | 7 μm | 9 μm | 10 μm | 12 μm | |
| Maximum Speed(2) | 25 mm/rev Lead | 1050 mm/s | 1250 mm/s | 1400 mm/s | 1100 mm/s |
| Maximum Acceleration | 2 g | ||||
| Maximum Force (Continuous) | 300 N | ||||
| Load Capacity(3) | Horizontal | 150 kg | |||
| Side | 150 kg | ||||
| Vertical(4) | N/A | ||||
| Moving Mass | No Tabletop | 9.9 kg | |||
| Tabletop | 16.2 kg | ||||
| Stage Mass | Less Motor | 77.1 kg | 83.2 kg | 89.2 kg | 95.2 kg |
| With Motor | 82.1 kg | 88.2 kg | 94.2 kg | 100.2 kg | |
| Material | Black Anodized Aluminum Body with Hardcoated Tabletop | ||||
|
MTBF (Mean Time Between Failure) |
30,000 hours | ||||
- Certified with the PLOTS option.
- Excessive duty cycle may impact stage accuracy.
- Payload specifications are for single-axis system and based on ball screw and bearing life of 2500 km (100 million inches) of travel.
- Vertical orientation is not available with the 25 mm lead PRO560-HS. See the 5 mm lead PRO560 for vertical applications.
- Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.
PRO560-HS Specifications
| Model | PRO560-HS-0800 | PRO560-HS-1000 | PRO560-HS-1200 | PRO560-HS-1500 | |
|---|---|---|---|---|---|
| Travel | 800 mm | 1000 mm | 1200 mm | 1500 mm | |
| Accuracy(1) | ±26 μm | ±27.5 μm | ±31 μm | ±35.5 μm | |
| Resolution | 2.5 μm with 2500-line Quadrature Encoder/0.1 μm with 1000-line AS Encoder | ||||
| Bidirectional Repeatability(1) | ±5 μm | ||||
| Straightness and Flatness(1) | 14 μm | 17 μm | 20 μm | 23 μm | |
| Maximum Speed(2) | 25 mm/rev Lead | 700 mm/s | 600 mm/s | 450 mm/s | 300 mm/s |
| Maximum Acceleration | 2 g | ||||
| Maximum Force (Continuous) | 300 N | ||||
| Load Capacity(3) | Horizontal | 150 kg | |||
| Side | 150 kg | ||||
| Vertical(4) | N/A | ||||
| Moving Mass | No Tabletop | 9.9 kg | |||
| Tabletop | 16.2 kg | ||||
| Stage Mass | Less Motor | 107.1 kg | 113.1 kg | 125.2 kg | 138.9 kg |
| With Motor | 112.1 kg | 118.1 kg | 130.2 kg | 143.9 kg | |
| Material | Black Anodized Aluminum Body with Hardcoated Tabletop | ||||
| MTBF (Mean Time Between Failure) | 30,000 hours | ||||
- Certified with the PLOTS option.
- Excessive duty cycle may impact stage accuracy.
- Payload specifications are for single-axis system and based on ball screw and bearing life of 2500 km (100 million inches) of travel.
- Vertical orientation is not available with the 25 mm lead PRO560-HS. See the 5 mm lead PRO560 for vertical applications.
- Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.
Electrical Specifications
| Drive System | Precision Ground Ball Screw with Brushless Servomotor |
| Feedback | 2500-line Quadrature Encoder on Motor/1000-line AS Encoder on Motor |
| Maximum Bus Voltage | 320 VDC |
| Limit Switches | 5 V, Normally Open or Normally Closed; 24 V Normally Closed |
| Home Switch | Near Motor End |
Recommended Controller
| Multi-Axis | A3200 | Ndrive CP, Ndrive HPe, Npaq |
| Ensemble | Ensemble CP, Ensemble HPe | |
| Single Axis | Soloist |
Soloist CP, Soloist HPe |
-
Cantilevered load capability of the PRO560-HS
Dimensions
-
PRO560-HS
-
Accessory Tabletop
Ordering Information
Ordering Example
| PRO560-HS | -25MM | -1200 | -TTM | -5V-NC | -BM | -3 | -LIFTING | -C05 | -PLOTS |
Ordering Options
| Series | Ball Screw | Travel (mm) | Tabletop | Limits | Motor | Cable Exit | Options | Coupling | Testing |
|---|---|---|---|---|---|---|---|---|---|
| PRO560-HS | -25MM |
-0300 -0400 -0500 -0600 -0800 -1000 -1200 -1500 |
-NO TT -TTM -TTU -TTACC /WIPER |
-5V-NC -5V-NO -24V-NC |
-BM -BM-BRK -NM -BM-AS -BM-AS-BRK |
-0 -3 -5 -8 -12 |
-FB05 -LIFTING |
-NONE -C05 |
-PLOTS -NO PLOTS |
Ball Screw
| Option | Description |
|---|---|
| -25MM | 25 mm per revolution ball screw |
PRO560-HS Series Linear Ball-Screw Stage
| Option | Description |
|---|---|
| -0300 | 300 mm travel stage with ball screw and limits |
| -0400 | 400 mm travel stage with ball screw and limits |
| -0500 | 500 mm travel stage with ball screw and limits |
| -0600 | 600 mm travel stage with ball screw and limits |
| -0800 | 800 mm travel stage with ball screw and limits |
| -1000 | 1000 mm travel stage with ball screw and limits |
| -1200 | 1200 mm travel stage with ball screw and limits |
| -1500 | 1500 mm travel stage with ball screw and limits |
Tabletop
| Option | Description |
|---|---|
| -NO TT | No tabletop |
| -TTM | Metric pattern tabletop |
| -TTU | English pattern tabletop |
| -TTACC | Accessory tabletop with mounting pattern for Aerotech rotary stages; see drawings for the supported stage types |
| /WIPER | Wiper option available on all tabletops |
Limits
| Option | Description |
|---|---|
| -5V-NC | 5 V normally-closed limits |
| -5V-NO | 5 V normally-open limits |
| -24V-NC | 24 V normally-closed limits |
Motor
| Option | Description |
|---|---|
| -BM | Brushless servomotor with 2500-line feedback encoder (BM500-MS-E2500H) |
| -BM-BRK | Brushless servomotor with 2500-line feedback encoder and motor mounted break (BM500-MS-E2500H-BK2) |
| -NM | No motor |
| -BM-AS | Brushless servomotor with 1000-line amplified sine encoder (BM500-MS-E1000ASH) |
| -BM-AS-BRK | Brushless servomotor with 1000-line amplified sine encoder and brake (BM500-MS-E1000ASH-BK2) |
Motor Orientation
| Option | Description |
|---|---|
| -0 | No motor |
| -3 | Left side cable exit |
| -5 | Right side cable exit |
| -8 | Right side foldback |
| -12 | Left side foldback |
Options
| Option | Description |
|---|---|
| -FB05 | Motor foldback kit for 0.5-inch diameter motor shaft (required for BM500 motor) |
| -LIFTING | Threaded inserts and lifting lugs; recommended for longer travel stages and XY assemblies |
Coupling
| Option | Description |
|---|---|
| -NONE | No motor coupling supplied |
| -C05 | 0.5-inch diameter motor shaft coupling |
Testing
| Option | Description |
|---|---|
| -PLOTS | Accuracy, repeatability, straightness and flatness plots |
| -NO PLOTS | No performance plots |
Accessories (to be ordered as separate line item)
| Option | Description |
|---|---|
| ALIGNMENT-NPA | Non-precision XY assembly |
| ALIGNMENT-PA10 | XY assembly; 10 arc sec orthogonal |
| ALIGNMENT-PA5 | XY assembly; 5 arc sec orthogonal |
| TC-PRO560 | Toe clamps for mounting PRO stage to an English dimension breadboard or hole pattern; recommended number of toe clamps for each travel length: 300-600 mm travel = 8 clamps; 800-1500 mm travel = 12 clamps |
*Please go HERE for complete information on XY, XZ and YZ assembly options.
*Please go HERE for complete information on motor orientation options.