MPS75SL 机械轴承丝杠平台 | MPS75SL Mechanical-Bearing Ball-Screw Linear Stage | 滚珠丝杠驱动直线定位平台
The MPS75SL is a compact, high-performance linear positioning stage that is perfect for the confines of the laboratory while providing the high reliability required in a production environment. It is the ideal choice for measurement, testing, accurate alignment and component assembly.
Mechanical Specifications
Model | MPS75SL-025 | MPS75SL-050 | MPS75SL-075 | MPS75SL-100 | ||
---|---|---|---|---|---|---|
Travel | 25 mm | 50 mm | 75 mm | 100 mm | ||
Accuracy | Standard | ±2.5 μm | ±3.0 μm | ±3.5 μm | ±4.0 μm | |
HALAR(1) | ±1.0 μm | ±1.0 μm | ±1.5 μm | ±1.5 μm | ||
Resolution | 0.1 μm | |||||
Repeatability (Bidirectional)(1) | ±0.75 μm | |||||
Straightness | ±2.0 μm | ±2.0 μm | ±3.0 μm | ±3.0 μm | ||
Flatness | ±2.0 μm | ±2.0 μm | ±3.0 μm | ±3.0 μm | ||
Maximum Speed |
1.0 mm/rev Ball Screw |
DC Motor | 50 mm/s | 50 mm/s | 50 mm/s | 35 mm/s |
SM Motor | 30 mm/s | 30 mm/s | 30 mm/s | 30 mm/s | ||
Load Capacity(2) | Horizontal | 15 kg | ||||
Side | 15 kg | |||||
Vertical | 4 kg | |||||
Stage Mass | 1.7 kg | 1.8 kg | 1.9 kg | 2.0 kg | ||
Material | Anodized Aluminum Body |
- With Aerotech controllers.
- Payload specifications are single-axis system.
- Excessive duty cycle may impact stage accuracy.
- Specifications are for single-axis systems measured 25 mm above the tabletop.
- Contact factory for specifications of stages with bellows option.
Electrical Specifications
Model | DC Motor (Standard and VAC) | SM Motor (Standard and VAC) |
---|---|---|
Drive System | DC Brush Servomotor | 24 VDC Bipolar Stepper Motor |
Feedback | 10,000 lines/rev Rotary Encoder | N/A |
Electronic Resolution | 0.025 μm | 0.025 μm @ 40,000 steps/rev Motor Resolution |
Maximum Bus Voltage | 48 VDC | 48 VDC* |
Limit Switches | 5V, Normally Closed |
-
*With Aerotech control system.
Recommended Controller
Model | DC Motor and SM Motor | |
---|---|---|
Multi-Axis | A3200 | Npaq/Npaq MR/Ndrive MP |
Ensemble | Ensemble LAB/Epaq/Epaq MR/Ensemble MP | |
Single Axis | Soloist |
Soloist MP |
- MPS75SL Load Curves
Dimensions
- MPS75SL
- MPS75SL Bellows Option
- MPS75SL Mounting Plates
- HDZ-MPS75SL L-Bracket
Ordering Information
MPS75SL Series Drive-Screw Stage
Option | Description |
---|---|
-025 | 25 mm travel stage with drive screw and limits |
-050 |
50 mm travel stage with drive screw and limits |
-075 | 75 mm travel stage with drive screw and limits |
-100 | 100 mm travel stage with drive screw and limits |
Stage Construction
Option | Description |
---|---|
-VAC | Vacuum preparation of the stage and motor to 10-6 torr |
Tabletop
Option | Description |
---|---|
-TTM | Metric pattern/thread tabletop |
Drive Screw
Option | Description |
---|---|
-B1MM | 1 mm/rev precision-ground ball screw |
Motor
Option | Description |
---|---|
-DC | DC servomotor with 3 meter integral cable |
-SM | Stepping motor with 3 meter integral cable |
Limits
Option | Description |
---|---|
-5V-NC | 5 V normally-closed limits |
Way Cover
Option | Description |
---|---|
-BELLOWS | Bellows way cover (not available with VAC option) |
Options
Option | Description |
---|---|
-MP | Breadboard mounting plate |
Testing
Option | Description |
---|---|
-PLOTS | Accuracy and repeatability plots |
-NO PLOTS | No performance plots |
Accessories (to be ordered as separate line item)
Option | Description |
---|---|
HALAR | High-accuracy system linear error correction for accuracy and repeatability |
HDZ-MPS75SL | Right-angle L-bracket |
HDZ-MPS75SL-VAC | VAC 6 prepared right angle L-bracket |
ALIGNMENT-NPA | Non-precision XY assembly |
ALIGNMENT-NPAZ | Non-precision YZ assembly |
ALIGNMENT-PA10 | XY assembly; 10 arc sec orthogonal |
ALIGNMENT-PA10Z | XZ or YZ assembly; 10 arc sec orthogonal |
ALIGNMENT-PA5 | XY assembly; 5 arc sec orthogonal |
ALIGNMENT-PA5Z | XZ or YZ assembly; 5 arc sec orthogonal |